Breathable mesh allows for maximum air circulation so flowers and herbs dry fast! Six individual drying chambers. Collapses flat for storage in the handy zippered case.

• Breathable mesh for quick drying of flowers & herbs
• Lightweight and easy to hang
• Easy to hang with included carabiner clip and hook-and-loop fastener loops
• Strong wire frames

Includes:

• x6 – 91.44 centimeters mesh trays
• Carabiner clip for hanging
• Storage case
• Measures 1.8m tall when fully extended

The post STACK!T Drying Rack w/Clips – Now With Center Support Strap appeared first on The Best Grow.

Simply place your cannabis and the appropriately-sized Boost®pack into an enclosed area. Our products are salt-free, spill-resistant and FDA-approved so you can place them in direct contact with cannabis.

Boost®packs will immediately start to balance the moisture levels in the air and your products to achieve the desired humidity level.

Our two-way humidity control products are available in a wide range of configurations to fit your packaging requirement:

We recommend using a 55% or 62% RH pack with your cannabis.

We offer Bulk orders at the best price in the market as follows:

• 2g sachets, RH 55%/62% -BULK – NO Individual Overwrap –NO Humidity Indicator Card – Packed in master case w/ double outer bag (2000 units) (Request Quotation for prices).

• 4g sachets, RH 55%/62% – BULK – NO Individual Overwrap –NO Humidity Indicator Card – Packed in master casew/ double outer bag (10000 OR 5000 units)(Request Quotation for prices).

• 67g sachets, RH 55%/62% – BULK- NO Individual Overwrap – NO Humidity Indicator Card – Packed in master case w/ double outer bag (480 units)(Request Quotation for prices).

• 320g sachets, at RH 55%/62% Individually Overwrapped w/ Humidity Indicator Card – 5 packs per display,8 displays per master case (200 units)(Request Quotation for prices).

The post INTEGRA BOOST HUMIDITY REGULATOR SACHETS appeared first on The Best Grow.

Mode: Processing material is dosed in an even layer on the shelves of trolleys which are placed inside the dryer. Heating of the air to the temperature required for the drying is carried out with thermal generator. The heated air is blown into the dryer by fan. Airflow in the dryer is horizontally, between the shelves i.e. between layers of processing material. Moisture saturated air is ejected through outlet flaps or outlet channels and unsaturated outside air is drawn through the flaps or channel for unsaturated air. In order to allow work of automatics and automate the process of drying, in the dryer are located temperature and humidity probes. When the humidity drops to a certain level (according to set parameters on the control cabinet), the valve to discharge moist air closes and drying is carried out in unsaturated air recirculation.

FUEL SOURCE:

The dryer can used with heating oil, natural gas and biomass (wood pellets or wood chips) as a fuel source.

1.Thermal generator type HT-AD is designed for heating spaces with warm air.
Energy source: wood chips G20 or pellets
The fuel is put into the input hopper which is 1 m³ of capacity, through which it is transported by a screw conveyor system into the furnace. The dosage is carried out by a dual axial screw transport system with airlock which ensures safety from returning of flame.
Thermal generator furnace is made out of sheet metal and the parts that are exposed to intensive heat are made out of fireproof sheet metal. The furnace is located beneath the fan and there is an integrated temperature regulator on the furnace, which increase the performance while reducing the level of output flue gas temperature.
Thermal generator of power of 10 – 150 kW can be equipped with an axial or radial fan, its capacity is 14,000 to 30,000 m³ of air, electronic thermostat with temperature probe and electrical control cabinet.
The removal of ash is done manually by emptying ash-container. (See photos of the Thermal Generator of Biomass: Wood chips or pellets)

2.Thermal generator type HT-RD is designed for warm air heating spaces and drying of agricultural products.
Energy: dry firewood, length up to 1.1 m in maximum diameter of 20 cm, the maximum humidity content of 20%.
The combustion process: pyrolysis.
Dry firewood is manually put to furnace (reactor) for the gasification of wood.
Thermal generator furnace is made of sheet metal and the parts that are exposed to intense heat are made out of fireproof sheet metal and thermal concrete. The furnace is located beneath the ventilator and there is an integrated temperature regulator on the furnace. That increases the performance while reducing the level of output flue gas temperature.
Thermal generator of power of 50 – 150 kW can be equipped with an axial or radial fan, his capacity is 14,000 to 30,000 m³ of air, electronic thermostat with temperature probe and control electrical cabinets.
The removal of ash is done manually. (See photos of the Thermal Generator on firewood)

Construction: Profiled INOX AISI 304 sheet metal
Revetment: Thermal isolation panels 50 mm thick

The post Trolley Container Dryer – For Industrial Hemp appeared first on The Best Grow.

PLUG AND PLAY -> IF YOU NEED TO MOVE YOUR DRYER FROM ONE FARM TO THE NEXT.

Drier capacity for the layer of 40 cm, effective surface area is 9m³.

Construction of the drier is made of shipping container and the walls and the roof of thermo-insulating panels.

The doors are double/two doors in front and one on the back, for thermal generator.

Floor of the drier is made of perforated galvanized sheet metal thickness of 1,5 mm and Ø3,2mm perforations, or mobile floor for loading and discharge of processing material.

FUEL SOURCE:

The dryer can used with heating oil, natural gas and biomass (wood pellets or wood chips) as a fuel source.

1.Thermal generator type HT-AD is designed for heating spaces with warm air.
Energy source: wood chips G20 or pellets
The fuel is put into the input hopper which is 1 m³ of capacity, through which it is transported by a screw conveyor system into the furnace. The dosage is carried out by a dual axial screw transport system with airlock which ensures safety from returning of flame.
Thermal generator furnace is made out of sheet metal and the parts that are exposed to intensive heat are made out of fireproof sheet metal. The furnace is located beneath the fan and there is an integrated temperature regulator on the furnace, which increase the performance while reducing the level of output flue gas temperature.
Thermal generator of power of 10 – 150 kW can be equipped with an axial or radial fan, its capacity is 14,000 to 30,000 m³ of air, electronic thermostat with temperature probe and electrical control cabinet.
The removal of ash is done manually by emptying ash-container. (See photos of the Thermal Generator of Biomass: Wood chips or pellets)

2.Thermal generator type HT-RD is designed for warm air heating spaces and drying of agricultural products.
Energy: dry firewood, length up to 1.1 m in maximum diameter of 20 cm, the maximum humidity content of 20%.
The combustion process: pyrolysis.
Dry firewood is manually put to furnace (reactor) for the gasification of wood.
Thermal generator furnace is made of sheet metal and the parts that are exposed to intense heat are made out of fireproof sheet metal and thermal concrete. The furnace is located beneath the ventilator and there is an integrated temperature regulator on the furnace. That increases the performance while reducing the level of output flue gas temperature.
Thermal generator of power of 50 – 150 kW can be equipped with an axial or radial fan, his capacity is 14,000 to 30,000 m³ of air, electronic thermostat with temperature probe and control electrical cabinets.
The removal of ash is done manually. (See photos of the Thermal Generator on firewood)

The post Portable container dryer – For Industrial Hemp appeared first on The Best Grow.

Container condensation dryer – details

Whole dryer is built in purpose-made container with dimensions of 40′ HC  ship container which makes this dryer portable and practically eliminates the need for special assembly operation at the installation site. Container isolation is  achieved by using standard plasticized or purposely-built thermal isolation panels.

Customer needs to assure an appropriate three phase electric power connection at the site of installation. There are two double winged doors – one on the front and one on the back of the container. Material is loaded in through the front doors. From the back, one has access to devices of the dryer. On the side, closer to the rear end, one can find a digital controller unit by which control over the drying process parameters is achieved. Also, next to it – an electrical cabinet with all necessary electrical elements.

Material placement inside the dryer

There are two options – two ways to place material in the dryer: on the floor or in shelves. With floor dryer, material to be dried is placed evenly on the perforated floor so that it makes a layer of uniform height. Layer height depends on the material to be dried. Industrial hemp for example – in the form of top cut (upper part of stem and leaves) can be loaded to a height of 1,7 meters (5.6′), and some other materials that, when evenly loaded, make a tighter, denser pile should be loaded to lower heights of about 40 – 50 centimeters (15”-20”).

Instead of spreading material onto the floor in one layer, another option is to spread material across several layers and into purposely-made shelves with wheels. Shelves can be taken out and put back in using a forklift. Also, another type of shelves can be made so that they are inserted onto a trolley with wheels with which one can manually manipulate. In any case, it is important to evenly spread and shake the material so that it does not compact. That way, a uniform drying of the material throughout the dryer is achieved. With floor dryers – there is an option to supply a moveable floor to ease material loading and unloading from the dryer. Effective drying area equals to 20 square meters (216 square feet). Batch volume capacity depends of the material that is to be dried and associated layer thickness.

Working principle of the condensation dryer

The container condensation dryer uses devices that implement vapor compression refrigeration process so that it extracts moisture from the material by cooling an air stream. There are two condensation and air conditioning devices of different rated power. Both of them are composed of two units – “external” and “internal” unit. It is common to call an external unit – a condenser, and an internal unit – an evaporator regarding phase change of the refrigerant fluid inside.

The refrigerant condenses in the condenser and evaporates in the evaporator. That should not be mistaken with air condensate which actually is collected in evaporator – that is – the internal unit of the condensation and air conditioning device. In the back of the condensation dryer, a ventilator is found that induces air flow. Air in induced circulation passes through wet material, collects moisture, and then returns to the back part of the dryer. That air passes through the evaporator of more powerful condensation and air conditioning device and is in turn cooled down. Low temperature air has less “ability to carry water”, so part of water vapor condenses and is collected in the device – and via tubes directed to the outside of the dryer. Part of internal air passes through the condenser and heats up again.

Performance and method of extracting moisture

Theoretically, change in air temperature due to the working of this device should be equal to zero. But, because of unavoidable losses – part of mechanical work is converted to thermal energy – there is a need of another device that regulates the temperature inside the dryer. Another condensation and air conditioning device is therefore needed. It has an evaporator placed in the chamber where the drying material and first device are and a condenser placed inside a closed sheet metal box that has two openings to the outside of the container.

Air from the dryer passes through the evaporator unit which cools it, while condenser unit cools the refrigerant fluid using outside air. No mixing of inside and outside air occurs. Throughout the dryer, humidity and temperature sensors can be placed in order to get a measured temperature and humidity field. That data can then be tracked graphically during some time period on remote desktop. That way, one can experiment and find optimal parameters for it’s process and ensure final product quality.

Condensation dryer process specifics

Condensation dryer principle of working enables drying at lower temperatures than in classic convection dryers with warm air.  This way, product quality is ensured and organoleptic properties preserved along with biochemical compounds that are of primary interest. Because there is no mixing of outside air with the air inside the chamber, there is no possibility of contamination during work. There are considerable energy savings compared to convection dryers. Only electric power source is needed, so one can utilize it’s own power source – for example – photovoltaic panels.

Processes at lower temperatures usually bring the water contained inside the plant more slowly to its surface, where it can only evaporate into the air. The retention and movement of moisture inside the material depends on its structure. Therefore, processes at higher temperatures take less time.

The post Condensation Container dryer – For Industrial Hemp appeared first on The Best Grow.

UL Certification: Ensures safety and compliance with global standards.

HACCP Certification: Commitment to food safety.

Global Compatible Power Supply: Seamlessly operates across various regions without the need for additional adapters or conversions.

Auto-Dry+Vacuum-Oven Modes: These new modes allow greater flexibilty, making the unit suitable for a variety of applications.

Innovative Shelf-Stack Design: We’ve eliminated the use of adhesives in our shelf stacks resulting in more accurate temperature control, the reduction of out-gassing and less residual odor.

Our new freeze dryer is engineered to deliver enhanced performance and versatility, empowering businesses to expand their drying capabilities with confidence.

NEW FEATURES + IMPROVEMENTS

• Global Certification: UL, CE, CSA, RCM

• HACCP Certification

• Global Power Supply. Can Be Used Anywhere In The World

• Innovative Shelf-Stack Design Improved Temperature Control Accuracy by 60%

• Auto-Dry Mode

• Candy-Pop Feature

• 12 Programmable Recipe Slots

• Market Leading Energy Efficiency

• No Heater Adhesives, No Out-Gassing

• New Door Seal For Improved Leak Rate

• Shorter Drying Time, Longer Replacement Intervals

• Freeze Dryer To Vacuum Pump Power Cable Included

FEATURES + BENEFITS

• Designed To Run 24/7

• Commercial Grade 1-Year Warranty

• Fully Manual Operation

• User Programmable, Up To 16 Steps Per Recipe

• USB Cennectivity For Software Update And Data Logging

PRODUCT CAPACITY: 1 – 2 WET pounds @80% MOISTURE CONTENT (about 0.9kg)

The post CC-MICRO 2.0 Lyophilizer appeared first on The Best Grow.

Dimensions 2m H x 1,5m W

If you require different dimensions, or extra levels contact us for a personalized quotation below.

The post Stainless Steel Drying Racks appeared first on The Best Grow.

Dryer capacity for the layer of 40 cm, the effective surface area:
– for 24 m² is 9,6 m³
– for 32 m² is 12 m³
– for 40 m² is 16 m³

Construction of the dryer is made from galvanized steel pipes, and the walls and roof of thermo-insulating panels 50 mm thick with a polyurethane filling. The dryer is container type and does not need a building permit.

Floor of the dryer is made of perforated galvanized sheet metal thickness of 1.5 mm, Ø 3.2 mm perforations.

The doors are double/two doors, for charging and discharging of processing material.

Dimensions of the dryer:
-Height: 2800 mm
-Width: 4000 mm

Layout of an effective length:
– 6000 mm for the dryer of 24 m²
– 8000 mm for the dryer of 32 m²
– 10000 mm for the dryer of 40 m²

If the dryer is located outdoors, it is necessary to make eaves 2 meters long in length of a drier, for protection of the thermal generator from weather conditions.

FUEL SOURCE:

The dryer can used with heating oil, natural gas and biomass (wood pellets or wood chips) as a fuel source.

1.Thermal generator type HT-AD is designed for heating spaces with warm air.
Energy source: wood chips G20 or pellets
The fuel is put into the input hopper which is 1 m³ of capacity, through which it is transported by a screw conveyor system into the furnace. The dosage is carried out by a dual axial screw transport system with airlock which ensures safety from returning of flame.
Thermal generator furnace is made out of sheet metal and the parts that are exposed to intensive heat are made out of fireproof sheet metal. The furnace is located beneath the fan and there is an integrated temperature regulator on the furnace, which increase the performance while reducing the level of output flue gas temperature.
Thermal generator of power of 10 – 150 kW can be equipped with an axial or radial fan, its capacity is 14,000 to 30,000 m³ of air, electronic thermostat with temperature probe and electrical control cabinet.
The removal of ash is done manually by emptying ash-container. (See photos of the Thermal Generator of Biomass: Wood chips or pellets)

2.Thermal generator type HT-RD is designed for warm air heating spaces and drying of agricultural products.
Energy: dry firewood, length up to 1.1 m in maximum diameter of 20 cm, the maximum humidity content of 20%.
The combustion process: pyrolysis.
Dry firewood is manually put to furnace (reactor) for the gasification of wood.
Thermal generator furnace is made of sheet metal and the parts that are exposed to intense heat are made out of fireproof sheet metal and thermal concrete. The furnace is located beneath the ventilator and there is an integrated temperature regulator on the furnace. That increases the performance while reducing the level of output flue gas temperature.
Thermal generator of power of 50 – 150 kW can be equipped with an axial or radial fan, his capacity is 14,000 to 30,000 m³ of air, electronic thermostat with temperature probe and control electrical cabinets.
The removal of ash is done manually. (See photos of the Thermal Generator on firewood)

Watch video below on the standard floor container dryer (fixed).

The post Floor Container Dryer for Industrial Hemp appeared first on The Best Grow.

Dry and Cure Cannabis In As Little As 12 – 24 Hours

INDISPUTABLE THC, TERPENE, TRICHOME AND FLAVOR PRESERVATION

Top Quality at a Fraction of the Time

Trichomes do not warp, shrink or break in the Cryo Cure cannabis machine. The final flower has an awe-inspiring look and feel. The aroma is powerful and the flavor is unforgettable, thanks to the high levels of retained terpenes.

PRESET RECIPES FOR SMOKABLE HEMP AND CANNABIS FLOWER

When you work with Cryo Cure’s patented technology, you get the perfected recipes that ensure flower comes out of the machine ready to use with each run. There’s no reinventing the wheel or experimenting with your own harvest: We’ve done all the fine-tuning for you. Multiple settings support whatever you plan to do with Cryo Cure, whether you plan to sell the flower as a smokable product or extract phytocannabinoids and terpenes.

INCREASE CANNABIS AND HEMP EXTRACTION YIELDS

With our pre-programmed Cryo Cure “processing” setting, moisture levels in flower and trim can be quickly reduced to between 1 and 2 percent. This results in significantly higher yields for BHO, DHO, CO2 and ethanol extraction methods; plus, solvent-free extracted and infused products have an improved terpene and cannabinoid profile.

PERFECT MOISTURE CONTENT MINIMIZED MOLD AND MILDEW

Cryo Cure’s precisely-controlled moisture levels prevent oxidation and prohibits the growth of harvest-ruining mold and mildew, while also preventing the spread of bud rot after harvest. Our machines don’t completely eliminate moisture; instead, they use the right balance of time, temperature, and pressure to bring moisture to optimal levels. These settings cure smokable hemp and cannabis flower to a target moisture content of 8% to 12%. For extraction, the moisture content is lowered for maximum results.

Cryo Cure’s patented technologies and methodologies are to eliminate the human error that can occur during the cannabis curing and drying process. The machines are pre-programmed for low moisture content while preserving the terpenes and trichomes.

THE HC PILOT: 9 trays, approximately 30 lbs (13KGS). wet weight capacity with 2” shelf spacing.

PITFALLS OF TRADITIONAL DRYING & CURING
1. Takes Weeks or Months to Complete
2. More of an Art than a Science
3. Risk of Mold & Bud Rot
4. Development of CBN & Delta 9
5. Waste of Valuable Resources
(Space, Heating & Cooling, Dehumidification, Human Resources)

FEATURES AND BENEFITS OF CRYO CURING:

1. Better Visual Appeal
2. Higher Retail Value
3. Prevents Mold
4. Increased Extraction Yields

5. Extended Shelf Life

6. Stabilizes Flower
7. Helps Prevent Degradation

WHY CRYO CURE AND NOT A TRADITIONAL FREEZE DRYER?

We can tell you, there are huge differences between a traditional freeze dryer and cryo cure:

• First of all, it is the norm that usually freeze dryers are designed to remove all of the moisture from whatever it is drying. So cannabis comes out dry as dust, without the right moisture content, and you have pulled off a lot of the terpenes as well.
• Also with some freeze dryers the ice bank capacity is not large enough for cannabis, because it has a lot of water, so when your ice bank gets too full, water is not conducted in that chamber anymore and it gets pulled through straight to your vacuum pump, which destroys it very quickly.
• Very importantly, a lot of people who sell freeze dryers, since they don’t usually understand the process, they’ll advise clients to re-hydrate the cannabis, even when is too dry, to go ahead and re-hydrate it, which is not ideal.
• With purchasing a Cryo Cure machine that is a little more expensive than a traditional freeze dryer, by the time you manage to figure out, (if you actually figure it out) experimenting with a couple of loads on a freeze dryer, the money you’ve lost with that cannabis, more than pays for the premium of buying the cryo cure machine, which is ready to go from the first load you put into the machine (no experimenting needed).

IN SUMMARY:

– Traditional methods often leads to dried outcannabis that needs re-hydrated
– Over dried cannabis has a similar consistency of a Cheeto and often turns to dust when pressed
– Often plant degradation occurs which leads to loss of terpenes
– Freeze drying foods is not the same as freeze drying cannabis
– Other machines can be cumbersome & hard to dial in
– Lack of ice bank capacity
– Poor customer service is frustrating
– Other machines breakdown often & can be costly to fix.

WITH CRYO CURE:

– NO NEED TO REHYDRATE CYRO CURED FLOWER!
– Patented “recipe” to retain optimal moisture content (10-12%) in finished flower
– Preserves all terpenes & fragile mono terpenes,even when drying for extraction
– Only freeze dryers built specifically for cannabis & hemp
– Unique features & flower safety assurances built in
– Superior ice bank capacity
– Excellent customer service 24/7
– Cyro Cure machines are low maintenance, easy to use & can be used daily with peace of mind

So the answer is yes! Cryo Cure is the way to go!

• 12 to 15 hour cycle time, depending upon product density and selected setting
• Smaller footprint than other Cryo Cure models
• Six built-in drawers
• Drawer size: Approx. 33.4” by 13.7”
• Comes equipped with three proprietary and patented Cryo Cure recipes
• Customize your settings through built-in controls
• Up to 9 kg wet weigh-in per cycle

The post CRYO CURE HC PILOT DRYING MACHINE – FOR MEDICINAL CANNABIS appeared first on The Best Grow.

Dry and Cure Cannabis In As Little As 24 Hours

Cryo Cure’s patent-pending technologies and methodologies are to eliminate the human error that can occur during the cannabis curing and drying process. The machines are pre-programmed for low moisture content while preserving the terpenes and trichomes.

WHY CRYO CURE HIGH-CAPACITY MACHINES?

Cryo Cure HC Models are the highest capacity freeze dryers being offered to the cannabis and hemp industry
that also includes our patented and global patent-pending, freeze drying process that gives you perfect product,
every time. Preserves terpenes, optimal moisture content and stabilized water activity.

Cryo Cure understands the impact cycle time has on annual production.

We have designed our systems with:

• External product handling –loading and unloading while the machine is processing another batch
• Quick condenser defrosting.
• Faster processing due to refrigeration capacity – lower chamber pressure => cooler sublimation
• Easy to operate touch screen controls that allow the operator to see what is going on in the process.
• Easy cleaning and certifications by inspection agencies.
• Remote monitoring and servicing from your cell phone or tablet.
• The result is a significant boost to your bottom line and consumer satisfaction.

The traditional weak links in equipment durability have been fully addressed to ensure a quality system that will run 24/7.

HC4: 4 carts, approximately 400 lbs. (180 kgs) wet weight capacity with 2 “shelving spacing

HC7: 7 carts, approximately 700 lbs. (300kgs) wet weight capacity with 2“shelving spacing

HC10: 10 carts, approximately 1,000 lbs. (450kgs) wet weight capacity with 2 “shelving spacing

PITFALLS OF TRADITIONAL DRYING & CURING
1. Takes Weeks or Months to Complete
2. More of an Art than a Science
3. Risk of Mold & Bud Rot
4. Development of CBN & Delta 9
5. Waste of Valuable Resources
(Space, Heating & Cooling, Dehumidification, Human Resources)

FEATURES AND BENEFITS OF CRYO CURING:

1. Better Visual Appeal
2. Higher Retail Value
3. Prevents Mold
4. Increased Extraction Yields

5. Extended Shelf Life

6. Stabilizes Flower
7. Helps Prevent Degradation

WHY CRYO CURE AND NOT A TRADITIONAL FREEZE DRYER?

We can tell you, there are huge differences between a traditional freeze dryer and cryo cure:

• First of all, it is the norm that usually freeze dryers are designed to remove all of the moisture from whatever it is drying. So cannabis comes out dry as dust, without the right moisture content, and you have pulled off a lot of the terpenes as well.
• Also with some freeze dryers the ice bank capacity is not large enough for cannabis, because it has a lot of water, so when your ice bank gets too full, water is not conducted in that chamber anymore and it gets pulled through straight to your vacuum pump, which destroys it very quickly.
• Very importantly, a lot of people who sell freeze dryers, since they don’t usually understand the process, they’ll advise clients to re-hydrate the cannabis, even when is too dry, to go ahead and re-hydrate it, which is not ideal.
• With purchasing a Cryo Cure machine that is a little more expensive than a traditional freeze dryer, by the time you manage to figure out, (if you actually figure it out) experimenting with a couple of loads on a freeze dryer, the money you’ve lost with that cannabis, more than pays for the premium of buying the cryo cure machine, which is ready to go from the first load you put into the machine (no experimenting needed).

IN SUMMARY:

– Traditional methods often leads to dried outcannabis that needs re-hydrated
– Over dried cannabis has a similar consistency of a Cheeto and often turns to dust when pressed
– Often plant degradation occurs which leads to loss of terpenes
– Freeze drying foods is not the same as freeze drying cannabis
– Other machines can be cumbersome & hard to dial in
– Lack of ice bank capacity
– Poor customer service is frustrating
– Other machines breakdown often & can be costly to fix.

WITH CRYO CURE:

– NO NEED TO REHYDRATE CYRO CURED FLOWER!
– Patented “recipe” to retain optimal moisture content (10-12%) in finished flower
– Preserves all terpenes & fragile mono terpenes,even when drying for extraction
– Only freeze dryers built specifically for cannabis & hemp
– Unique features & flower safety assurances built in
– Superior ice bank capacity
– Excellent customer service 24/7
– Cyro Cure machines are low maintenance, easy to use & can be used daily with peace of mind

So the answer is yes! Cryo Cure is the way to go!

The post Cryo Cure High-capacity models HC4, HC7, and HC10 Drying Machines appeared first on The Best Grow.