The Mixvent Series is a very compact design of mixed-flow fans that is part of a very flexible system designed specifically for use in homes, hotels and apartments etc., as well as for hot and cold air transfer from one room to another.

Construction

The casings of the 1300/250 and 2000/315 models are of epoxy coated steel; other sizes are of reinforced injection moulded plastic. All units are provided with an integral mounting foot. Impellers are of injection moulded plastic/steel and of mixed flow design.

Motors

Type – 2-speed. Models 160-350 are shaded pole; 500 and above are squirrel cage induction motor.

Electricity supply – 220-240V, single-phase, 50Hz.

Bearings – sleeve up to size 350/125 and ball for all other models.

Speed-controllable using VA type speed controller in high speed only.

Internal Thermal Protection

By fuse to size 350/125 and auto-reset for the remainder.

Testing

Air flow to BS848:Part 1, 1980

Noise to BS848:Part 2, 1985

Special Features

The fans can be removed without disturbing the connecting ductwork via specially designed support brackets and a 2-speed switch can be supplied that suits all models.

In addition to being used as single-stage fans the Mixvent range can be arranged in parallel, in series or in both parallel and series.

Such flexibility enables higher air flow and pressure demands to be met. 

The post Mixvent Extractor Fan appeared first on The Best Grow.

The HIT Series of duct mounted centrifugal in-line fans is suited to a wide range of residential, commercial and industrial exhaust or supply air applications, such as toilets, kitchens, bathrooms, offices, restaurants and equipment cooling. All models are designed for direct connection to standard diameter circular ducting and comes standard with manufacturing.

Construction

Corrosion resistant pressed galvanised sheet steel body with backward-curved centrifugal impeller .Electrical terminal on flying lead.

Motors

Type – external rotor, squirrel cage induction motor.

Electrical supply – 220-240V, single-phase, 50Hz.

Bearings – sealed for life, ball.

Speed – controllable with 2-speed switch available for Hi/Lo speed operation .

Motor – IP44 Protection.

Testing

Air flow testing to BS848:Part 1,1980, ACMA 210-85 and ASHRAE51-1985.

Internal Thermal Protection

Auto-reset thermal protection is supplied as standard on all units.

Special Features

Can be mounted on any angle.

Suitable for ducting on intake and/or discharge side and for supply or exhaust applications.

In-line centrifugal

Spigot connecting diameter in mm

HIT

In-line fans of the HIT Series shall be as supplied by AMS.

Impellers shall be backward-curved centrifugal design and driven by speed-controllable external rotor motors with integral thermal overload protection.

The housing is of pressed galvanised steel.

The post 150MM IN LINE TUBE EXTRACTOR FAN appeared first on The Best Grow.

The post DC condensing dehumidifiers appeared first on The Best Grow.

Product Details

The ECLIPSE Digital Environmental Controller F60 offers an integrated digital control for the critical conditions of the growing environment. Autopilot takes complete atmospheric control so that the user only has to take care of the crop. F60 precisely controls the temperature, humidity and any device that needs the programmed function on/off.

Its three LED screens make the control and regulation of atmospheric conditions very simple, continuously showing the current temperature and humidity as well as the count behind the thermostat with repeat cycle. Their LED indicators show which modes are active and inform the user of any errors.

The ECLIPSE Digital Environmental Controller F60 is very easy to program and displays with full transparency environmental conditions 24 hours a day. The ECLIPSE F60 is equipped with three separate power outlets for external refrigeration control(air conditioning or fan), heating, humidity (humidifier or dehumidifier) ​​and a fourth outlet equipped with a cyclical digital timer that controls any device that requires functions programmed on/off as water pumps, extractor fans or CO2 devices.

The post Autopilot ECLIPSE F60 Digital Environmental Controller appeared first on The Best Grow.

Product Details

• Fully customizable ppm deadband and CO₂ setpoint allow flexibility in programming
• Trend Chart records CO₂ levels per minute, hour, day and week for accurate analysis of CO₂ distribution
• Adjustable Trend Chart Zoom levels let you trace your ppm levels
• Remote CO₂ sensor probe w/photocell & 15′ data cable lets you take readings from proper grow room locations
• 2-Channel Low Drift NDIR Sensor precisely reads CO₂ ppm levels
• Green LED identification lights inform you of the unit’s status at all times

Watch Video Below for more details

The post CO2 Monitor & Controller appeared first on The Best Grow.

The Phantom PHOTOBIO Advanced Quantum PAR Meter provides accurate and cost-effective measurement for any light source used in horticultural applications.  The Advanced Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a positive proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis, important for maximizing crop yield.

Complete with compact main unit, remote sensor, two connection cables (short-coiled & 12’ long-straight), AAA batteries and protective carrying case.  Convenience of storing up to 99 measurements for easy reference while adjusting light fixture height, dimmer setting and other environmental changes throughout each phase of growth.

Phantom has a long-standing track record of providing reliable, high-performance products within the horticultrual equipment industry.

• Compact, portable meter with highly accurate remote quantum sensor
• Simple and easy to use operation, with storage of up to 99 readings
• Ideal for grow tent, greenhouse and commercial grow applications
• Compatible with modern sole-source and supplemental LED fixtures, high pressure sodium (HPS) DE grow lights, as well as any traditional indoor grow light source

The post PHOTOBIO Advanced Quantum PAR Meter appeared first on The Best Grow.

Works perfect with this: Co2 Monitor & Controller

Product Details

Elevated atmospheric CO2 levels show remarkable increases in plant growth productivity, and creating these elevated levels in your grow room is simply the easiest way to accelerate plant growth. The CO2 generators provide and maintain the carbon dioxide levels needed to meet maximum growing potential, and operate for only pennies a day.

These highly reliable CO2 generators feature powder-coated steel enclosures that resist moisture, rust and discoloration, providing years of trouble-free operation. They are very safe and easy to operate. The built-in solid-state electronic ignition module creates a spark to light the burners. The units are also equipped with a safety tip over feature that shuts off the gas source if the unit is tipped or falls over. These generators are available in both propane and natural gas models, along with high-altitude versions in all sizes.

All models are equipped with:

• Precision manufactured brass burners
• Solid-state electronic ignition module—no pilot light necessary
• TIP OVER switch shuts off gas source if the unit falls or tips over
• SHUT DOWN warning with LED error indicator lights

The tip shutoff switch engages at an angle of 30° +/-5°.  Disengages, allowing, the unit to turn back on when the unit is returned to ≤ 10° angle.

• 8-Burner: Spaces 28′ x 28′ and smaller
• 10-Burner: Spaces 35′ x 35′ and smaller

These CO2 generators are perfectly paired with our line of environmental controllers.

NOTE: These generators require unrestricted airflow through the bottom and must be mounted by hanging/suspending.

The post Co2 Generator – 8 burners appeared first on The Best Grow.

Smart humidity
Arete is so quiet, you can use it in or close to
your bedroom without disruption. Just press the
Night mode button to switch off all lights and
bleeps, and the machine runs in quiet mode.
Check the status at any time, knowing that after
five seconds it will revert back into Night Mode.
To get the best out of Arete all you have to do
is press a single button. Arete will take care of
the rest – deciding on the correct fan speed and
switching performance up or down as required.

Night mode
Arete is so quiet, you can use it in or close to
your bedroom without disruption. Just press the
Night mode button to switch off all lights and
bleeps, and the machine runs in quiet mode.
Check the status at any time, knowing that after
five seconds it will revert back into Night Mode.

The post Meaco Dry Arete One 20LT Dehumidifier appeared first on The Best Grow.

Average Operating Consumption: 1450W
Moisture Removal at 27°C and 60% RH: 48L/24h
Moisture Removal at 32°C and 80% RH: 80L/24h
Operating Temp Range: 5°C to 35°C
Condensate Tank Capacity: Continuous drainage only
Typical Room Area: 120m²
Mass: 47kg
Dimensions: 705mm(H) x 500mm(W) x 455mm(D)

The post 80L Commercial Dehumidifier appeared first on The Best Grow.

Volt: 220 V

Power: 0.2 kW

Speed: 3 Speed rpm

Control your climate, improve comfort levels and add ventilation with these cost efficient, highly adaptable fans. Set them to oscillate, or remain stationary at different speeds to circulate throughout your room or office. The motor guard assembly can be adjusted in the vertical place to allow the air flow to be directed upward or downward.

The post Fan appeared first on The Best Grow.